Receiving two or three quotes to repaint the same apartment and noticing significant price gaps is common. One professional quotes 25 euros per m², another 45 euros, for the same surface. These differences do not automatically mean one quote is overpriced or the other unusually low: they often reflect different work scopes, even though the price per m² appears to be the same comparison metric.
What hides behind a price per m²
Materials and labour are not always included together
The first thing to check is whether the quoted price covers labour alone, or if it also includes paint and supplies (drop cloths, tape, primer). A quote that seems cheaper might simply exclude the cost of paint, which will be invoiced separately or left to the client's expense.
The number of coats makes a big difference
A wall in good condition sometimes needs only one finishing coat, while a more absorbent surface or a dark colour to cover may require two or even three. Two quotes announcing very different prices per m² may actually plan different numbers of coats, which explains much of the gap.
Surface condition is rarely visible in the quoted price
A cracked wall, a ceiling with water damage, or crumbling plaster require much longer preparation work than a wall already smooth and clean. This preparation work (filling, sanding, plastering, primer) often represents a significant part of the final price, but is not always detailed the same way from one quote to another.
Region and building type also play a role
The price per m² can vary by region, local cost of living, and job site access constraints. An old building with uneven walls or difficult access via a narrow lift can explain a gap compared to a similar job done on the outskirts or in another area.
Comparing quotes that seem incomparable
Questions to ask before comparing the figures
Before ranking quotes from cheapest to most expensive, it is better to check a few common points across all of them:
- Is the surface calculated the same way (floor area, actual paintable area, number of coats)?
- Is paint supply included or billed separately?
- Does surface preparation (filling, sanding, primer) figure in the price or as an option?
- Is the planned number of coats identical from one quote to another?
A table to visualise market variations
| Surface type | Indicative price (materials and labour) |
|---|---|
| Wall in good condition | 20 to 30 euros / m² |
| Wall in average condition (filling, partial plastering) | 30 to 40 euros / m² |
| Degraded wall (full plastering, repairs) | 40 to 55 euros / m² and more |
| Ceiling | 25 to 45 euros / m² |
| Facade | 30 to 60 euros / m² |
These ranges remain general benchmarks. They help spot a quote clearly outside the market, but never replace an assessment of the actual job.
Why a per m² quote always stays indicative
A per m² figure given before seeing the actual surface condition can only be preliminary. Two 60 m² apartments can hide completely different realities: cracks, moisture marks, crumbling plaster. The final price can only be confirmed after assessing the actual surface condition, whether through photos and videos or during a site visit - both work the same way. On our platform, photos and videos of surfaces are systematically requested before closing a quote, precisely to avoid surprises during the job.
What must be in writing in the agreement
A work scope written and shared
Once the quote is accepted, the key is that the exact work scope is recorded clearly, not just promised verbally. On our platform, all job details stay online: the client, the professional, and the platform can at any time consult the same document with the agreed scope. This prevents disagreements about what was planned or not once the job starts, a point detailed in our article on [clauses to check before signing a painting contract](https://myfixio.fr/fr/blog/contrat-peinture-clauses-verifications-ne-pas-manquer).
Check that the professional is properly registered
Before signing, it is useful to verify that the company or craftsman has a valid SIRET number. Our platform checks that all painters offered are properly registered with a SIRET before presenting them as an option, which simplifies this verification for the client. This ties in with other [checks to make before hiring a painter in France](https://myfixio.fr/fr/blog/embaucher-peintre-france-verifications-avant-signer).
Key points before choosing a quote
Rather than comparing only the final figure, it is more useful to ask each professional to detail their calculation method and what it actually covers. A slightly more expensive quote that includes serious surface preparation is often better than a low price that leaves out essential repairs, only to bill them as extras later. Systematically asking for the same level of detail from each professional consulted remains the best way to compare offers on a common basis.
Frequently Asked Questions
Gaps usually come from what is included in the price per m²: materials or labour alone, number of coats, surface preparation. Two quotes can estimate very different services while announcing the same surface area.
Not necessarily. A low price that excludes wall preparation or plans only one coat can cost more in the end if touch-ups become necessary during the job.
A per m² quote always stays indicative until the actual surface condition has been assessed, via photos, videos, or a site visit. The final price can only be confirmed after this step.
This often happens when the actual wall condition differs from the initial estimate. This is why it is useful for the work scope to be written and shared between the client and professional from the start, to limit surprises.
No, it varies by region, local building condition, and access constraints. Older buildings, for example in some Paris, Lyon, or Bordeaux neighbourhoods, often require more preparation than more recent homes, which is reflected in the final price.
Ready to paint?
Get free quotes from verified local painters in minutes. No commitment.









