Between pots marked "eco-friendly", A+ pictograms and sometimes lesser-known labels, it is not always simple to distinguish a genuine low-emission paint from mere marketing. Yet the choice of product has a direct impact on indoor air quality, especially in the weeks following work. Here is how to read labels and ask the right questions before launching an interior painting project.
Understanding mandatory VOC labelling
What the A+ class means
For several years now, all paint cans sold in France must display a health label. In France, a decree makes labelling mandatory, classifying products from A+ (very low emissions) to C (high emissions), and since 1 September 2013, all construction products, floor coverings, paints and varnishes sold in France must display their VOC emission class. This classification is based on precise measurement: measurements cover around ten specific substances (formaldehyde, acetaldehyde, toluene, xylene, etc.) as well as total VOCs, evaluated 28 days after application in a standardised test chamber.
In practice, the A+ class corresponds to the lowest emission level available on the market, and it is the minimum to seek for a child's bedroom or living room. But be careful: this classification alone is not always enough, as the gap between products classified A+ can remain significant.
Why the regulatory threshold is not everything
European regulation sets ceilings by product type rather than a single threshold. For example, an indoor matt paint must have a rate below 30 g/L, while for a glossy paint, the maximum authorised rate is 100 g/L. A paint can therefore be perfectly legal while emitting significantly more VOCs than a paint called "biobased" or "natural", whose content often falls below 1 g/L.
It is also worth keeping in mind a methodological limitation: this classification only takes emissions into account 28 days after application and not immediately after application, when emissions are strongest. Hence the importance of airing the room well during and after work, regardless of the class displayed on the pot.
Labels to know beyond the A+ label
Beyond regulatory labelling, two voluntary labels allow you to go further in verifying a paint's composition.
European Ecolabel and NF Environment
These two certifications are awarded in France and share some of their criteria, but with different requirements. In France there are two ecolabels, the European Ecolabel and the NF Environment label, both awarded by the same body, AFNOR Certification, and they are not mandatory: manufacturers who wish to do so apply for their award. The difference lies in particular in the VOC threshold tolerated: the European Ecolabel is generally more demanding on common criteria, with a maximum VOC content lower than that tolerated by NF Environment.
These rules evolve regularly, with transition periods for manufacturers already certified when the award criteria are revised.
Biobased paints and their specifics
Alongside these general labels, biobased paints (based on plant resins, clay or lime) often display performance superior to regulatory thresholds. Several manufacturers operating in France now offer ranges whose VOC content falls well below 1 g/L, a level close to the "zero VOC" claimed by certain brands. The choice between these product families depends mainly on the substrate, the room concerned and the finish sought.
A few useful reference points for comparing options available in France:
- Conventional paint classified A: suitable for less sensitive rooms, but avoid in a child's bedroom.
- Standard A+ paint: the minimum recommended for all living spaces.
- Biobased or "VOC-free" declared paint: suitable for sensitive people, baby nurseries or poorly ventilated homes.
- Paint with European Ecolabel or NF Environment: guarantees independent verification of composition, not just final emission.
Comparing options by budget and use
A table to find your way quickly
| Paint type | Indicative VOC content | Label to look for | Recommended use |
|---|---|---|---|
| Conventional acrylic | Up to 30 g/L | A or A+ label | Passageways, sheltered exterior |
| A+ acrylic "air quality" | Below 5 g/L | A+ | Living room, hallway, office |
| Biobased / plant-based | Often below 1 g/L | Ecolabel, NF Environment | Bedroom, child's room |
| Lime or clay | Very low, variable by binder | Specific label per manufacturer | Period walls, damp rooms |
This table is indicative: the exact composition varies from one manufacturer to another, even within the same labelling class.
The special case of period homes
In Haussmann buildings or period properties in town centres, the surfaces to be treated are often extensive (generous ceiling heights, mouldings, multiple rooms in succession). In this context, even with products individually classified A+, the combined surface area can increase the total amount of VOCs released during the work. Good ventilation during and after application therefore remains essential, regardless of the level of product chosen.
How to take action on your next project
Before you start, here is a simple method to secure your choice of eco-friendly paint:
- Systematically check the A+ label on each pot, room by room.
- Additionally look for a European Ecolabel or NF Environment label if you want greater assurance on composition.
- Choose a biobased paint for bedrooms, especially children's rooms.
- Ask the professional which brands they usually use and why, rather than relying solely on the price per litre.
- Plan enhanced ventilation of the home during work and in the weeks following.
On our platform, the choice of low-VOC paint can be discussed directly with the painter when the estimate is drawn up. As with any m² estimate, this type of quote remains indicative until the professional has assessed the actual condition of the surfaces to be painted: this can be done through photos and videos or during a visit, both working the same way. This is moreover why our platform always requests photos and videos of the surfaces before finalising a quote, to avoid unpleasant surprises during the work. Once the product and scope of work are validated, all details remain visible online for the client, the painter and the platform, which prevents misunderstandings about the brand or finish chosen along the way.
Frequently Asked Questions
Not necessarily. The A+ class guarantees a low level of VOC emission measured in the laboratory, but it says nothing about the origin of raw materials or the overall environmental impact of the product. For a more comprehensive approach, it is better to combine this label with a label such as the European Ecolabel or NF Environment.
Both labels are awarded by the same body in France but do not have exactly the same thresholds or criteria. The European Ecolabel generally imposes a lower maximum VOC content, while NF Environment examines a slightly different range of criteria, such as the absence of certain specific components.
Even with an A+ or biobased product, it is still recommended to air the room well during application and in the days following. Emissions are always greatest immediately after application, before gradually decreasing over several weeks.
Prices vary widely depending on brand and certification level, and some biobased ranges are in a price bracket close to conventional quality paints. The price difference is often justified by composition, durability of the paint film and the number of coats required.
Yes, that is entirely possible and even recommended if you have a preference for a particular label or brand. Simply specify it when requesting the quote, so the professional can take it into account in their estimate and work organisation.
Ready to paint?
Get free quotes from verified local painters in minutes. No commitment.









