Back to blog

Eco-friendly paint: which type to choose for your wall

Eco-Friendly PaintsExterior Painting
MyFixio·3 min read
A paint roller with a red handle in a tray of white paint
Photo by Karl Solano on Unsplash

Why the choice depends first on the wall, not just ecological concerns

Not all eco-friendly paints are equal, and more importantly, they are not all suitable for the same surfaces. An old stone or rammed earth wall does not have the same needs as a recent plasterboard partition. Before choosing a range for ecological reasons, you must first look at the nature of the surface, its age and general condition.

Old walls and traditional buildings

On an old wall, the breathability of the surface is essential. Lime or mineral silicate paint allows the wall to evacuate moisture naturally, unlike some acrylic films that are too waterproof and can trap moisture, causing problems over time.

Recent walls and standard surfaces

On a more recent surface such as plasterboard or cement render, a bio-based acrylic paint (made from plant resins) or clay paint offers a good compromise between ecology, ease of application and aesthetic finish, particularly indoors.

Facades exposed to the weather

On a facade, durability counts as much as the ecological aspect. Silicate paints show good long-term performance on well-prepared mineral surfaces, a point to check before starting a facade renovation, as discussed in our guide on the best time to paint a facade depending on the region1.

Budget and coverage: what this changes in practice

The price per litre does not tell the whole story: coverage and the number of coats needed vary the final bill. Here is an approximate guide for a typical room or facade.

Paint typeIndicative price per litreAverage coverageIdeal for
Bio-based acrylic€25 to €4010 to 12 m²/LInterior walls, recent properties
Lime paint€15 to €25variable, absorbent surfaceFacades and stone walls, traditional buildings
Mineral silicate€30 to €458 to 10 m²/LOld facades with high exposure
Clay€20 to €358 to 10 m²/LBedrooms, living rooms, matte finish

These figures remain indicative: a very absorbent wall with lime render will use more product than a smooth partition, and the number of coats varies depending on the surface condition.

How to turn this choice into a reliable quote

Once the paint type is identified, the next step is to have the job quoted by a professional who has seen the actual wall condition. A quote per m² remains always indicative at this stage, because two walls of the same surface area can hide very different realities: cracks, old distemper peeling, weakened render. The final price can only be confirmed after assessing the real condition of the surfaces, whether through photos and videos or during a site visit - both work the same way. On our platform, we systematically ask for photos and videos of surfaces before finalizing a quote, precisely to avoid unpleasant surprises during the work.

A few helpful steps before contacting a painter:

  1. Identify the age and nature of your wall (plasterboard, cement render, stone, rammed earth).
  2. Look for signs of moisture or old repairs that might point towards lime rather than acrylic.
  3. Ask the professional which eco-friendly range they recommend and why, based on your surface.
  4. Keep a written record of the paint type chosen: on our platform, job details remain visible online for the client, the professional and the platform, which prevents misunderstandings about the range or finish selected.

Finally, remember to check that the painter you choose is properly registered with a valid SIRET. Our platform verifies that all painters presented as options are properly registered before offering them.

Frequently Asked Questions

It is not ideal. An old wall needs to breathe, whereas acrylic paint, even if bio-based, often forms a film with low permeability to water vapour. Lime or silicate paint is generally better suited to this type of surface.

Not necessarily. Some lime paints remain affordable, while high-end bio-based ranges or technical silicates cost more than conventional paint. The cost depends mainly on the composition and actual coverage on your surface.

It is possible but more technical than conventional paint, as application, drying and surface preparation follow different rules. On a fragile or damp old wall, using a professional experienced with these products prevents costly mistakes.

You must first check the nature of the old coating and the general condition of the surface: crumbling render or old plastic paint can prevent lime or silicate from adhering properly. A professional can assess this from photos, a video or a site visit.

Good certified bio-based or mineral ranges now offer durability comparable to conventional paints, provided the surface is respected and the application conditions recommended by the manufacturer are followed.

Ready to paint?

Get free quotes from verified local painters in minutes. No commitment.

Get a free quote

Sources

External sources open in a new tab.

  1. Peindre à l'extérieur : le bon moment selon votre région en Francemyfixio.fr

Share this article!

Sérgio Ferrás

Author

Sérgio Ferrás

Free Quotes

Need a painter?

Get free quotes from trusted local painters in minutes.

4.7 · 370+ reviews
Get a free quote

No commitment · Response in minutes

Recent posts